- The G.729a audio codec has been added.
- The RTP packet delivery interval can now be set from the codec settings.
| G.711extension |
○20ms / 40ms |
| G.711 |
○20ms / 40ms |
| G.726-32 |
○20ms / 40ms |
| G.729 |
10ms / 20ms / ○40ms / 60ms |
○:default
- QoS compatibility has been added.
- The setting of whether or not to use ToS and CoS can now be made from the Web setting page.
- The symbols # and * can now be used in SIP addresses.
- The SIP registration validity period and session validity period can now be set from the Web setting page.
- When the "Restore Settings" command is executed, the settings stored at "Save/Load Config" are now also deleted.
- When set to use an SIP server, the IP address is now displayed on the display's top screen.
- The IP address and SIP address (when set to use an SIP server) can now be checked by pressing the <- key at the display's top screen.
- As a UNIVERGE SV7000 compatible version, functions of Ver. 1.34 of the provided firmware are incorporated to allow association with an SV7000.
NOTES
*At the SV7000's "Terminal Classification" setting item, set the ProjectPhone to "TYPE1: Standard SIP Terminal".
*When a ProjectPhone is associated with an SV7000, the ProjectPhone's multi-point connection function cannot be used.
An SV7000 VS-32 is required for multi-point connection.
*The ProjectPhone's hold and forward functions cannot be used. (It is possible to accept holding and forwarding from other terminals.)
*Calls using the ProjectPhone's IP call function cannot be made between a ProjectPhone that is associated with an SV7000 and one that is not associated.
